Roof Framing Plan

This is the fifth in the series of creating drawings, the Roof Framing Plan. For this drawing, you need to have the objects on the correct classes and layers. In this movie, there are several objects that are on the incorrect classes and need to be corrected.

You can see extended movies on this topic here: http://archoncad.com

if you are getting started with Vectorworks check out my patreon: patreon.com/jonathan_pickup

Creating a Framing Plan in Vectorworks 2023 - podcast 248

 This is the third movie in the series about creating drawings. In this movie we look at creating a framing plan, a plan that shows the walls, door and window openings, window numbers, lintels, and beams. We use design layers, classes, sheet layers, and viewports to set this up.

Creating Drawings - Roof Plan

Carrying on with our series on creating drawings, this movie looks at creating a Roof plan. We will look at the design layer, creating and editing the object needed, create the sheet layer, viewport, etc. for the extended version of this movie check out: https://www.patreon.com/jonathanpickup

Podcast 245 Scale Site Plan

I saw someone on line have trouble with importing a PDF site plan scaling it to the correct size. This movie shows you how I do it. This is a shortened movie, to see the full movie:

https://archoncad.com/knowledge-base/tips-and-tricks/#scaling-a-site-plan

Custom Selection and Custom Tool Podcast 244

The Custom Selection and Custom Tool/Attribute is a powerful way to speed up your Vectorworks. You can use it to create custom tools that you can reuse again and again. The best thing is that you do not need to know how to program Vectorworks. 

Creating a Site Plan in Vectorworks 2023

This movie is an update of an old movie, it shows how to create a boundary line, how to add the building to a site plan, how to create the site plan drawings, and how to calculate the site coverage (house /site ratio).

In this movie, I show you how to draw a quick building using Vectorworks walls, slab, foundations, roof, and roof framing. The techniques I use on this simple building can easily be used on a more complex building.

 Get more Vectorworks training here:  http://www.archoncad.com

AutoCAD tutorial

 I have been asked to teach AutoCAD to high school students, this is lesson 1

VECTORWORKS Q&A with Jonathan Pickup

 This is on of the early Vectorworks Q&A sessions hosted by Novedge (www.novedge.com). it covers a range of questions from attendees. For more details, see the information below.

Vectorworks 2021 - Connecting Slab Components and Wall Components - Podcast 234

 I have just posted a movie showing how to connect walls to slabs 

Youtube Movie - Difficulty Selecting Objects

 I have just posted a YouTube movie about the trouble selecting objects, especially when there is a site model object. 

Vectorworks 2021 Show Other Object While in Groups - Podcast 230

After the lighting video, someone asked how I made the information outside the group vanis, this movies will show you how. 

Vectorworks 2021 Move By Points Tool - Podcast 227

www.archoncad.com

I saw on a Facebook group that someone wanted to know haw to use the Move By Points tool, so I made this movie tho show how to use it. This is a very powerful tool that I use a lot. I use in 2D (plan) and I use it in 3D as well.  This movie will explain the modes and show you when to use each mode. 

#Vectorworks #architect 

00:25 Move by Points tool introduction

01:32 Move mode

01:54 Duplicate mode

03:55 Distribute mode

04:15 Object Retention mode

04:45 Selection Retention mode

05:32. Reference Point Mode

05:56 using the floating datum to measure a distance

06:06 moving a window in a wall using the move by points tool

06:35 using the Reference point mode on any object 

07:38 using move by points in 3D

Vectorworks - Quick Roof Faces

I was helping someone the other day to make a complex roof quickly, using roof faces. This is how I do it. 

Vectorworks 2021 - Creating a Shadow Analysis

Scheduling Materials in Wall Styles with Vectorworks 2021

 I have just added a movie showing how to schedule materials in Wall Styles.

Vectorworks 2021 course available

 I have updated my Vectorworks Foundation course for Vectorworks 2021:

https://store.archoncad.com/courses/general/vectorworks-foundation-2021/

You Can Control Drawing Labels in Vectorworks 2021

 

Drawing Label Styles in Vectorworks 2021

In Vectorworks 2021, you now have control over your drawing labels. In previous versions, you could control a few limited options but you couldn't control everything. 2021 allows you to create drawing label styles. These styles mean that you can choose what information is on the label, what size the label is, what fonts you're using, even where the lines are and what line weights are. 

Out of the box, Vectorworks has some premade drawing label styles. I found that the easiest way to create my own drawing label style was to start with one of the standard Vectorworks ones and then edit it.

• Start by placing a selecting a standard Vectorworks drawing label. 

• Go to the Object Info palette.
• Click on the Style pop-up menu  
• Choose Edit Style...

This will open a dialog box so that you can choose what to do with the style.

• Click on the Edit Drawing Label Layout... button. 

This is a special editing area at one-to-one scale for you to edit your drawing label style. In this area you can change the line weights, fonts, colours, and positions of objects.


In this image, I have added extra text and moved the locations of the drawing number. I want this label to show the back-reference location of the detail. This would be the section or drawing that had the original detail  reference.


Once I have the text and lines in the correct location, I can edit the text label field. 

• Select the required text. 
• Go to the Object Info palette.
• Click on the Define Drawing Label Field...

This opens a dialog box for you to define the connections for the text. 

• Click on the Parameter Name pop-up. 

In this image, I have chosen the Drawing Title. There are several options to choose from. 

• Select the required parameter (the information you want). 
• Click on the Add to Definition button. 
• Click on the OK button

• When you have finished your editing, click on the Exit Drawing Label Layout button at the top-right go your screen. 

 

• Click on the OK button to return to your drawing.
• Create a series of your favourite drawing labels and store them in you library file.  

free webinar

 novedge and I are hosting a free Q& A Session for Vectorworks :

https://novedge.com/blogs/webinars/pickup-vectorworks-architect-q-and-a-with-jonathan-pickup-episode-6

bring your questions!

Lesson 2.2- Creating Drawings form a 3D Model - 2020 Foundation Course

Lesson 2.1- Creating a Simple 3D Model - 2020 Foundation Course

ArchiCAD tutorials

 I am teaching several students how to assemble architectural drawings in ArchiCAD. I have created a playlist on my web site:

https://www.youtube.com/playlist?list=PLjt2JD0muIE9HHczWPkcbAHkHDAX90Y38

Lesson 1.5 - Test Yourself - 2020 Foundation Course

Lesson 1.4 - Text and Dimensions - 2020 Foundation Course

Lesson 1.3 - Controlling Graphics - 2020 Foundation Course

Lesson 1.2 - Selection and Snapping - 2020 Foundation Course

Lesson 1.1 - 2020 Foundation Course

Vectorworks Foundation Course Added to Knowledgebase

I am in the process of adding my Vectorworks Foundation Course for Vectorworks 2021 to my knowledgebase site. I have been updating all the movies to show you how to get the best from Vectorworks 2021.

Pickup Vectorworks Architect - Q&A with Jonathan Pickup Episode 5

 

What it's About

We would like to invite Vectorworks Architect users to join our Q&A session. We welcome all, novices and masters alike, who would like to get technical answers about the program.  Jonathan Pickup is a true and tested Vectorworks Guru.  We hope this service will boost your Vectorworks skills, so you can focus on your design. Ask us anything!   

This Q&A is free and lasts about one hour.

book now....

Pickup Vectorworks Landmark

 there is a free landmark webinar from novedge:

https://novedge.com/blogs/webinars/pickup-vectorworks?fbclid=IwAR0WyvxNfXuSq0UuT6UR_YLvfzXCy6Szj353llYCk2RpJwjEqf6CTsiPGR0

Pickup Vectorworks - Q&A with Jonathan Pickup Episode 3 Free online Q&A with novedge

What it's About

We would like to invite Vectorworks Architect users to join our Q&A session. We welcome all, novices and masters alike, who would like to get technical answers about the program.  Jonathan Pickup is a true and tested Vectorworks Guru.  We hope this service will boost your Vectorworks skills, so you can focus on your design. Ask us anything!   

This Q&A is free and lasts about one hour.

Register here:

https://novedge.com/blogs/webinars/pickup-vectorworks-q-a-with-jonathan-pickup-episode-3

Interactive Workshops July 2020 - Space Objects

Space objects are a powerful part of Vectorworks and they are an important conceptual model of BIM (Building Information Modeling). The space objects are not just a 2D or 3D object, they also carry information about the room name, the required area, the volume, finishing information, etc. Spaces in Vectorworks are classified as special objects and they are very useful.

We had our online sessions in July and the recorded sessions are available here for subscribers... 

Creating and Managing Drawings in Vectorworks

In December, my subscribers asked for a session on the many tools and techniques that work together to create and manage drawings in Vectorworks Architect 2020. These techniques are the “bread and butter” (basic skills needed) of creating and managing drawings in Vectorworks: saved views viewports multiple view panes controlling visibilities on drawings managing viewports and classes.
 
The webinar is free and will last about one hour, including the Q&A session.

Register Now!

Class and Layer Filtering

I have added a movie on class and layer filtering. This is a great technique for controlling your work when you have lots of layers and classes to detail with.
I have also added a movie on how to create the class and layer tags you might need to create your class and layer filters.
watch now....

Crop PDF and Create Hole

I see a user on the Vectorworks Community board having trouble with a PDF. They want to crop the PDF and they want hole in the PDF. This movie will show you how.

Quickstart to ArchiCAD 1.4 - Guides, Snaps, And Grids

Understanding the subtleties of snapping and guides will dramatically improve your productivity and it will make it easier for you to use ArchiCAD. This movie explains how to use guides, snaps, and grids.

Quickstart to ArchiCAD Part 1.3 - Tools and Commands in Detail

This movie explains many of the tools and concepts for creating and editing in ArchiCAD. This movie uses an exercise file that you will need if you want to carry out the exercises as well. Download the file from this link:
exercise files

Quickstart to ArchiCAD Part 1.2 - ArchiCAD Interface

This movie explains the ArchiCAD interface.

Quickstart to ArchiCAD Part 1.1 - Selecting and Deselecting

This movie covers the basics of selecting and deselecting. Selection is an important concept to learn early, so I'm covering it first.

Quickstart to Vectorworks Part 3

This movie carries on from part 2. In this movie you will learn model a house again. We will also cover lighting, textures, and rendering.

Quickstart to Vectorworks Part 2

This movie carries on from part 1. In this movie you will learn how to model a house. We will use the snapping that we learned about in Part 1, we will use the Push/Pull tool and learn about other 3D tools.

Getting Started with Vectorworks - Part 1

This movie, for Vectorworks 2019 is the first in a series of movies to show how to get started quickly in 3D. In this movie you will learn how to set your units, page size, 3D view, and how to model a house. You will learn about snapping, 3D viewing, how it use basic tools such as the Rectangle, Circle, and Push/Pull tools.

Vectorworks Tip Retaining Wall

You can create a retaining wall on a site model by using a couple of site modifiers. They can be pads or contours. 

The important part is to make sure that you use a grade limits to control the extent of the site mode change. 

podcast 225 - Nudge

Nudge is where you move objects a small amount using the shift+arrow keys. it can be useful, but watch out if you need to measure the objects.

Introduction to BIM for Landscape Course

It has been a while, but I have decided to start face-to-face courses. I used to have these courses on a regular basis in Auckland NZ. I am starting with the first course late March 2017. It’s already sold out, so don’t worry about the short notice, but I am planning on running these courses every three months. Use this contact page if you would like to book for this course.

There is a lot of talk about Building Information Modelling (BIM) in relation to architecture, but not in relation to landscape design. The principles behind BIM can be used to speed up the a production of your landscape projects and drawings. This course is an introduction to using BIM with Vectorworks Landmark and it has been designed to teach you the concepts of BIM and how to use the Vectorworks Landmark in the most productive way. It has all been brought together in a concise face to face course.

Introduction To BIM Course

It has been a while, but I have decided to start face-to-face courses. I used to have these courses on a regular basis in Auckland NZ. I am starting with the first course this week. It’s already sold out, so don’t worry about the short notice, but I am planning on courses every three months. Use this contact page if you would like to book for this course.

BIM Introduction Course

Many people talk about BIM these days, it is an important way to create drawings. This course is an introduction to using BIM with Vectorworks Architect and it has been designed to teach you the concepts of BIM and how to use the Vectorworks Architect in the most productive way. It has all been brought together in a in a concise face to face course.

In this 2-day course you will draw a simple two story project that will teach you the basics of BIM. We will start with first principle and work through creating a Building Model that will allow us to create plans, sections, and elevations. We will progress through site modeling, solar studies, rendering 3D views, internal room elevations, and details.

By the end of the course attendees should be able to create a Building Information Model and create drawings from it.

The course is limited to 7 people max, BYOD. 

Course Outline:

Day 1

Session 1 – Setting Up the Project

In this session we will set up the project using Design Layers, Stories, and levels. As well as setting up the project we will also start to create a library and template so that in future projects we will have an efficient way to get started.

Session 2 – Concept Modelling

In this session we will start to create our project using techniques to create the site model, property line, surrounding buildings, and the bulk and location of our project.

Session 3 – Creating the Building

In this session we will use our concept model to create our building using wall styles, slab styles, and roof styles. These styles to the Stories and Levels so that when changes are made to the stories, the walls and slabs will automatically update.

Day 2

Session 4 – Creating Doors and Windows

In this session we will create doors and windows for our project using styles. These styles will allow the windows and doors to be created efficiently and saved to our library. We can also use these door and window styles to create a door and window schedule.

Session 5 – Internal Fixtures

In this session we will fit out the building placing fixtures in bathrooms, kitchens, adding stairs, and adding additional furniture and fixtures to the plan.

Session 6 – Drawings

In this last session will create our drawings. We will create a site plan, floorplans, sections, internal elevations, details and detail referencing.

Additional Information

This course is an intensive course for learning Vectorworks architect. You might think that there is a lot to go through in a short space of time, and you would be right. In order to give you as much background information as possible at the conclusion of the course, you will be given online courses (value $280 plus GST ) that you can refer to for further information. Included in the cost of this course are the following online courses:

• Vectorworks Fundamentals
• Vectorworks Architect
• Vectorworks Architect Asia
• Vectorworks Site Modelling.

How Well Do You Know Vectorworks?

I get a lot of questions from users about my web sites. They want to know if they should join my subscription web site, or whether they should complete one of my courses first.

epodcast200 - Create Dimension Standards

When you create a Dimension Standard you will find that it is only in the file you created it. Unlike other resources, Dimension Standards cannot be exported to your library. They also do not appear in the Resource Manager. However, you can import Dimension Standards from  another file.  When you create a dimension standard there is an Import button on the dialog box. If you click on this button, you can navigate to the file that has the correct Dimension Standard. When you choose your Dimension Standards, they will be imported into your current file.

Read more...

epodcast199 - Create Similar Object

When you are creating your projects, you often want to create more objects like to ones you already have. You could copy an paste an object, but then you have to move it and edit it. The Create Similar Object command sets the same tool, class, and tool settings as the original. This allows you to move a new location and start using the correct tool instantly.

Read more...

epodcast198 - Slab Drainage

Vectorworks 2017 introduced Slab Drainage. There is a specific tool to use to create the drainage. This tool has several modes that allow you to add a drain, edit the location and direction, connect drains together, and edit the valleys. The slab drainage can change the entire slab, or it can taper a component of the slab, but it only works with slabs.

Read more...

epodcast197 - Select Similar Tool

I use this tool a lot to select a group of things that are similar. You can define how similar they are. They could be the same class, the came object type, or a combination of these. You can save your favorite settings so that you can recall them easily.

Read more..

epodcast196 - Door With Custom Height Sidelight

If you are using Windoor, you can use the vertical divisions to create a full height door with ½ height sidelight next it. With the standard Vectorworks doors and windows you can’t create this object using the same technique, but there is a way to do it. create the door and sidelight that you require and make sure that the jam of the door in the sidelight overlap.  Select the door and window. Make a symbol from them.

When you create a door, choose the option to use Symbol Geometry and use your door symbol. This allows you to use the door object and add it to your schedule.

Read more...

epodcast195 - Keeping Viewports Rendered

When you open a file, you sometimes find that all the viewports need updating. This can be frustrating and time consuming. There are a few things you can try. You can enable the Viewport Cache or you can convert the viewports to bitmaps. 

Read more...

podcast 224 Align & Distribute

You can use the contextual menu to activate Align/Distribute.

podcast 223 - Roadway (Custom Kerb)

Of all the roads available in Vectorworks, this is the most flexible.

podcast 222 - Adding and Using WebBroswer Favorites/Bookmarks

Saving Favorites/Bookmarks makes it easy to return to a page on a web site. This movie tries to show you in a simple way how to save these.

Podcast 221 - Exporting web view using Vectorworks 2017

In November 2016 my subscription workshop will be looking at creating an interior design project. As part of the project I wanted to show people how they can export the design so that other people can look at it, and Vectorworks 2017 has a facility for exporting your design as a virtual reality project (called web view). This movie is an introduction to using web view with Vectorworks 2017. You will see how you can view the project, export the project and then view this this a web browser..

2D Timed Exercise Version 2017

I was asked to draw this simple house as a timed exercise to compare drawing techniques with other prorgams.  You can see the Autocad version here:
https://knowledge.autodesk.com/support/autocad/getting-started/caas/screencast/Main/Details/af10251e-0457-4b1d-ad17-d6983a96b656.html

Bamboo Spark

I often use the Bamboo Spark to take notes in meeting and when I am training others. the great thing about it is that you write on regular paper and the Spark then sends the electric version of your notes to your device. The Bamboo Spark software works on your iPad or android device.
It is a great utility for recording your notes and you can use it with Bamboo Paper to colour your notes and sketches.

Podcast 220 - Creating Downspouts With Vectorworks 2017

A few months ago I covered Roof Accessories with my subscription group. I covered using Extrude Along Path… to create the downpipes (downspouts), but I did not cover this plug-in. This plug-in is a very quick way of creating your downpipes (downspouts) few models, and it is also free from this website (https://andreafacchinello.wordpress.com).Thank you Andrea this is a great utility!

Podcast 219 - Sketching on an iPad using Procreate

Using an app like Procreate does allow you to trace over a photo, but I prefer to sketch over the photo so that it is not a direct copy. I used to have great drawing tutor (Pat Hanley) that kept telling use to focus on the “Big Issues” when drawing.

You can read more about this here:
http://learn.archoncad.com/2016/06/28213/sketching-on-an-ipad/

podcast 218 - Apple iOS 9 - WiFi Assist

One of the new features of iOS9 is WiFi Assist. this tells your phone to use cellular data when the phone is connected to a low quality WiFi signal. This will mean that your phone looks for the best signal whether it is WiFi or cellular.

Podcast 217 - Microsoft Word Tips - Styles

When I create documents using Microsoft Word, I always make sure that I set up my paragraphs using styles. Styles allow you to control the font, size, justification, et cetera. They are very powerful and they are easy to apply.

podcast 216 - Full Screen Window Macintosh Yosemite

I recently upgraded my computer to Yosemite. I have a habit of wanting to see my drawing window full-screen. However, when I click on the green button to make my drawing wonderful screen I have been losing my menubar. In this movie I will show you how to change this. I am sure that many people know this trick already but when I found that I was very happy.

epodcast194 - Interactively Scaling a Viewport By Dragging

You can't change the scale of the viewport by interactively scaling it (using the selection tool  to drag the corner).  But you are allowed to do this to a group. If you make the viewport into a group, then you can  and interactively scale it.

Read more...

epodcast193 - Plants and Row Spacing

Vectorworks 2017 introduced a change to the plant spacing. in the past your plant spacing was a specific number and that was it. Now, plant spacing can be a specific number or it can be "Best Fit." The idea of best fit is that Vectorworks will try to put as many plants as it can using the spacing that you have specified,  but it will always place plant start click and at the end click. As well as that, Vectorworks added the option to have the row spacing different from the plant spacing.

Read more...

Archoncad Vectorworkout Subscription 10 Years Old!

10 Years Old!

Who would have thought. When I started this 10 years ago the internet was still new, the idea of online training was still in its infancy. Now, it is everywhere. I started this subscription service with a few members and now we have hundreds of subscribers.